彭邦文. 钻井钢丝绳吨公里计算和定期滑移切换法[J]. 石油钻采工艺, 1995, 17(3): 47-50. DOI: 10.3969/j.issn.1000-7393.1995.03.010
引用本文: 彭邦文. 钻井钢丝绳吨公里计算和定期滑移切换法[J]. 石油钻采工艺, 1995, 17(3): 47-50. DOI: 10.3969/j.issn.1000-7393.1995.03.010
shu
Peng Bangwen. CALCULATING TON-KILOMETER OF DRILLING WIRE ROPE AND TIMED GLIDE CUTTING METHOD[J]. Oil Drilling & Production Technology, 1995, 17(3): 47-50. DOI: 10.3969/j.issn.1000-7393.1995.03.010
Citation: Peng Bangwen. CALCULATING TON-KILOMETER OF DRILLING WIRE ROPE AND TIMED GLIDE CUTTING METHOD[J]. Oil Drilling & Production Technology, 1995, 17(3): 47-50. DOI: 10.3969/j.issn.1000-7393.1995.03.010
shu

钻井钢丝绳吨公里计算和定期滑移切换法

CALCULATING TON-KILOMETER OF DRILLING WIRE ROPE AND TIMED GLIDE CUTTING METHOD

    摘要
  • 摘要: 目前现场钢丝绳的使用,还停留在只作措施要求和凭经验办事的阶段。为此,笔者提出了吨公里的计算式,并以计算结果指出现场操作的十大规则,说明定期滑移、切除的必要性。供现场监督和工程师们参考。

     

    Abstract: Identified that timed sliding cutting the wire is necessary and ten operating rules on site were presented which can be offer to supervisor and engineer as reference.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回