Category
THE ANALYSIS OF ROCK STRESS AND DISPLACEMENT OF THE SURROUNDING WALL OF INCLINED WELLBORE
Huang Rongzun, Bai Jiazhi, Zhou Yihui, Liu Yushi
1994, 16(5): 1-7. DOI: 10.3969/j.issn.1000-7393.1994.05.001
Abstract
THE ACTION MECHANISM AND APPLICATION EFFECT OF SLANT NOZZLE
Zhang yun, Lu bo, Wang Qiuju
1994, 16(5): 8-13,28. DOI: 10.3969/j.issn.1000-7393.1994.05.002
Abstract
TO EVALUATE AND TO SELECT BITS BY GRAY ASSOCIATION ANALYSIS METHOD
Wang Junliang, Liu Ming
1994, 16(5): 14-18,24. DOI: 10.3969/j.issn.1000-7393.1994.05.003
Abstract
THE REASEARCH AND APPLICATION OF ANTI-WHIRL PDC BIT IN ABROAD
Wang Fuxiu
1994, 16(5): 19-24. DOI: 10.3969/j.issn.1000-7393.1994.05.004
Abstract
DETERMINATION OF FORMATION FRACTURE GRADIENT PROFILE IN NEW EXPLORATING AREA
Chen Yongning, Yan Zhentai
1994, 16(5): 25-28. DOI: 10.3969/j.issn.1000-7393.1994.05.005
Abstract
GENERAL FORMULAS FOR PLANNING THE TRAJECTORY OF HORIZONTAL WELLS
Hu Mingjun
1994, 16(5): 29-32,37. DOI: 10.3969/j.issn.1000-7393.1994.05.006
Abstract
CEMENTING WITH G402 FILTRATE LOSS REDUCTION ADDITIVE
Liu kiucheng, Yang Quansheng
1994, 16(5): 33-37. DOI: 10.3969/j.issn.1000-7393.1994.05.007
Abstract
CALCULATION OF IN-SITU THREE-DIMENSIONAL PRINCIPAL STRESS USING THE OILFIELD DEVELOPMENT DATA
Liu Congbiao, Liu Xiange
1994, 16(5): 45-49. DOI: 10.3969/j.issn.1000-7393.1994.05.012
Abstract
CHARACTERISTIC POINT ANALYSIS TECHNIQUE USING THE PRESSURE IDENTIFICATION CURVE OF SLUG FLOW
Cheng Shiging
1994, 16(5): 50-52,59. DOI: 10.3969/j.issn.1000-7393.1994.05.013
Abstract
ANALYSIS ON THE DOWNHOLE STRESS OF SLIP SUPPORTED PACKER
Liu Zhanguang
1994, 16(5): 53-59. DOI: 10.3969/j.issn.1000-7393.1994.05.014
Abstract
CONTROL AND SIMULATION TECHNIQUE OF THE PROTECTION OF FORMATION FROM DAMAGE
Zhang Shaohuai, Li qi
1994, 16(5): 60-65. DOI: 10.3969/j.issn.1000-7393.1994.05.015
Abstract
MECHANISM STUDY OF PARTICULATE MIGRATION USING MICROMODEL EXPERIMENT
Mei Wenrong
1994, 16(5): 66-69. DOI: 10.3969/j.issn.1000-7393.1994.05.016
Abstract
A METHOD FOR QUANTITATIVELY ANALYSING OF THE STROKE USING PUMP CARD
Zhou Chifeng
1994, 16(5): 70-72,78. DOI: 10.3969/j.issn.1000-7393.1994.05.017
Abstract
A TECHNIQUE FOR DIAGNOSIS OF WORKING CONDITIONS OF HYDRAULIC PISTON PUMP
Qin yi, Li xin, Guo Linzhu, Mu Jianghong
1994, 16(5): 73-78. DOI: 10.3969/j.issn.1000-7393.1994.05.018
Abstract
THE TECHNOLOGY TO PREDICT THE SAND PRODUCTION OF OIL WELL AND ITS APPLICATIONS
Wang Yanhui, Liu Xisheng, Wang Hongxun
1994, 16(5): 79-86. DOI: 10.3969/j.issn.1000-7393.1994.05.019
Abstract
THE LABORATORIAL MEASUREMENT OF RELATIVE PERMEABILITY CURVE OF OIL AND WATER
Zhang Xuanqi
1994, 16(5): 87-90. DOI: 10.3969/j.issn.1000-7393.1994.05.020
Abstract
AN APPLICATION OF THE INTEGRATED PROJECT IN WELL STIMULATION AND PROFILE CONTROL IN TIGHT RESERVOIR
Han Zhenhua, Wang Gang, Zeng Jiuchang
1994, 16(5): 91-95. DOI: 10.3969/j.issn.1000-7393.1994.05.021
Abstract