Category
RESEARCHING AND PRACTICE OF DEVIATION CONTROL BY INCREASING WOB
Gao Deli, Gao Baolui, Xie Jinwen, Lu Jiaxin, Long Ping
1995, 17(6): 1-6. DOI: 10.3969/j.issn.1000-7393.1995.06.001
Abstract
DIRECTIONAL WELL PATH EFFECTING ON DRILLING AND PRODUCTION
Gong Wei’an
1995, 17(6): 7-12,24. DOI: 10.3969/j.issn.1000-7393.1995.06.002
Abstract
HOW TO IMPROVE STRENGTH OF FLEXIBLE DRILLPIPE
Ji Jiayuan, Niu Runqin, Qiang Jie, Qu Xixian
1995, 17(6): 13-18. DOI: 10.3969/j.issn.1000-7393.1995.06.003
Abstract
COMPUTER SIMULATING HYDRAULICS OF PDC BIT ON BOTTOM OF HOLE
Gao Zhenguo, Dong Jie
1995, 17(6): 19-24. DOI: 10.3969/j.issn.1000-7393.1995.06.004
Abstract
LABORATORY RESEARCH OF STRESS AND STRAIN FIELD UNDER BOTTM OF BOREHOLE
Dong Shiming, Shi Taihe
1995, 17(6): 25-27,37. DOI: 10.3969/j.issn.1000-7393.1995.06.005
Abstract
DRILLING FLUID TECHNIQUE IN THE WELLS OF DUAL CASINGS IN JINGQIU AREA
Zhao Jiangying, Deng Shaognng, Cheng Fawen
1995, 17(6): 28-32. DOI: 10.3969/j.issn.1000-7393.1995.06.006
Abstract
DELAYED-SET SLURRY SYSTEM USED IN REPAIRING WELL OF CASING DAMAGED
Liao Gang, Xie Yingquan
1995, 17(6): 33-37. DOI: 10.3969/j.issn.1000-7393.1995.06.007
Abstract
RESEARCH AND APPLICATION OF SPE-1 EXPANDING AGENT IN LONG CEMENTING SECTION
Tang Dengfeng
1995, 17(6): 38-42,48. DOI: 10.3969/j.issn.1000-7393.1995.06.008
Abstract
DRILLING TECHNOLOGY APPLIED BY AMERICAN UNOCAL COMPANY IN SIAM BAY
Jiang Wei
1995, 17(6): 43-48. DOI: 10.3969/j.issn.1000-7393.1995.06.009
Abstract
DYNAMIC PREDICTION OF HYDRAULIC FRACTURING EFFECTS
Zhao Jinzhou, Guo Jianchun
1995, 17(6): 55-61,88. DOI: 10.3969/j.issn.1000-7393.1995.06.013
Abstract
THERMOPLASTIC MECHANICS ANALYSIS OF CASING STRING AND TUBING STRING DURING INJECTING STEAM
Li Zifeng, Wu Dehua, Huang Yaofang, Rui Songyun
1995, 17(6): 62-68,73. DOI: 10.3969/j.issn.1000-7393.1995.06.014
Abstract
OPTIMUM DESIGN AND APPLICATION OF LARGE-SCALE GAS WELL FRACTURING
Zhang Shicheng, Wang Hongxun, Zhang Yongping
1995, 17(6): 69-73. DOI: 10.3969/j.issn.1000-7393.1995.06.015
Abstract
WELL TEST INTERPRETER METHOD FOR OIL-GAS TWO-PHASE FLOW
Liu Zhenyu, Liu Yang, Zhai Yunfang
1995, 17(6): 74-77. DOI: 10.3969/j.issn.1000-7393.1995.06.016
Abstract
SUPPLY-DISCHARGE COORDINATED CHART OF SUCDER ROD PUMP AND ITS APPLICATIONS
Geng Yuguang, Zhai Yunhui
1995, 17(6): 78-81. DOI: 10.3969/j.issn.1000-7393.1995.06.017
Abstract
DEVELOPMENT AND APPLICATION OF JHR NEW TYPE CORE HOLDER SERIES
Yu Weichu, Hu Sanqing, Liu Gang, Zhang Yihua,
1995, 17(6): 82-84,97. DOI: 10.3969/j.issn.1000-7393.1995.06.018
Abstract
KQTP PLUGGING REMOVAL TECHNOLOGY
Zhu Minghua
1995, 17(6): 85-88. DOI: 10.3969/j.issn.1000-7393.1995.06.019
Abstract
EXPERT SYSTEM FOR FAULT DLAGNOSIS OF SUCKER ROD PUMPING WELL
Li An, Zhang Siwei
1995, 17(6): 89-92. DOI: 10.3969/j.issn.1000-7393.1995.06.020
Abstract
CAUSE ANALYSIS AND PREVENTION MEASURES OF SUCKER ROD PARTING
Ma Xiaozhong, Pei Yunyou, Wu Zongfu
1995, 17(6): 93-97. DOI: 10.3969/j.issn.1000-7393.1995.06.021
Abstract