Category
DEFORMATOIN ANALYZING ON BHA OF VERITABLE CROSS SECTION USING THE BEAM AND COLUMN METHOD
Su Yinao, Zhang Guohong
1996, 18(2): 1-7. DOI: 10.3969/j.issn.1000-7393.1996.02.001
Abstract
OVERVIEW ON CONTROLLING DEVIATION IN STRAIGHT WELL
Gao Baokui, Gao Deli
1996, 18(2): 8-13. DOI: 10.3969/j.issn.1000-7393.1996.02.002
Abstract
NON-LINEAR GEOMETRIC ANALYZING OF DRILL STEM DRAG FORCE IN HORIZONTAL WELL
Guo Yongfeng, Lu Yingmin
1996, 18(2): 14-17. DOI: 10.3969/j.issn.1000-7393.1996.02.003
Abstract
APPROXIMATE SOLUTION OF STABLE FLUCTUATION PRESSURE OF NEWTONIAN FLUID IN ECCENTRIC ANNULAR
Wang Haige, Liu Xisheng, Dong Jie
1996, 18(2): 18-21. DOI: 10.3969/j.issn.1000-7393.1996.02.004
Abstract
RESEARCHING OF DISPERSION ADDITIVE USED IN MTC AND ITS EFFECT ON RHEOLOGICAL PROPERTY
Hou Jirui, Guo Heng, An Ce, Wen Xueli
1996, 18(2): 22-25,34. DOI: 10.3969/j.issn.1000-7393.1996.02.005
Abstract
CEMENTING TECHNOLOGY IN TARIM EXPLORATION AREA
Yang Guisheng, Zhang Zhenqing
1996, 18(2): 26-30,42. DOI: 10.3969/j.issn.1000-7393.1996.02.006
Abstract
DIFFERENTIAL PRESSURE EFFECTING PDC BIT ON PENETRATION RATE
Zhou Haitao, Zhou Yuhai
1996, 18(2): 31-34. DOI: 10.3969/j.issn.1000-7393.1996.02.007
Abstract
DESIGN OF RETAINER SPRING OF CORING TOOL USED IN HORIZONTAL WELL
Xu Junliang
1996, 18(2): 35-38. DOI: 10.3969/j.issn.1000-7393.1996.02.008
Abstract
SYNTHESIS OF FLUID LOSS ADDITIVE OF SULFNATE TANNIC-PHONEMIC RESIN
Huang Ning
1996, 18(2): 39-42. DOI: 10.3969/j.issn.1000-7393.1996.02.009
Abstract
CASING CORROSION PROTECTION TECHNIQUE USING POSITIVE ELECTRODE RING
Yang Quan’an, Wu Xuesheng
1996, 18(2): 43-45. DOI: 10.3969/j.issn.1000-7393.1996.02.010
Abstract
OVERVIEW ON DRILLING AND TRANSPORTING EQUIPMENT IN BEACH AREA AT HOME AND ABROAD
Meng Xianhua
1996, 18(2): 46-49. DOI: 10.3969/j.issn.1000-7393.1996.02.011
Abstract
STUDY ON STAGED TESTING AND FRACTURING TECHNOLOGY OF SAIPING-1 WELL
Yang Hongzhi, Zhang Ruiyong, Song Zhenyun, Gao Jianfeng
1996, 18(2): 52-57. DOI: 10.3969/j.issn.1000-7393.1996.02.013
Abstract
OPTIMIZATION OF LIMITED ENTRY FRACTURING OPERATION PARAMETERS
Yang Zhaozhong, Ren Shuquan
1996, 18(2): 58-61. DOI: 10.3969/j.issn.1000-7393.1996.02.014
Abstract
THE ASSORTED PRODUCTION TECHNIQUES FOR IMPROVING DEVELOPMENT EFFECTIVENESS OF LOW PERMEABILITY FAULT-BLOCK RESERVOIR OF HUABEI OILFIELD
Cai Zhigang, Zhang Manku, Hu Haiyan, Xiao Yun, Li Shuge
1996, 18(2): 62-69. DOI: 10.3969/j.issn.1000-7393.1996.02.015
Abstract
STUDY AND APPLICATION OF TUBINGLESS PRODUCTION SYSTEM
Liu Liandong, Wang Tongbin, Li Zhihua, Zhang Yutian, Liu Binghua
1996, 18(2): 70-74. DOI: 10.3969/j.issn.1000-7393.1996.02.016
Abstract
USE OF PRESSURE BUILDUP TESTING FOR DETERMINING WELL STIMULATION CANDIDATE AND EVALUATING WELL STIMULATION EFFECTIVENESS
Lin Jia’en
1996, 18(2): 75-78,94. DOI: 10.3969/j.issn.1000-7393.1996.02.017
Abstract
THERMO CALCULATION AND APPLICATION DURING STEAM HEATING FOR HORIZONTAL WELL OF VISCOUS OIL RESERVOIR
Xu Minghai, Zhang Xin, Chen Yan, Zhang Yi
1996, 18(2): 79-82. DOI: 10.3969/j.issn.1000-7393.1996.02.018
Abstract
HIGH EFFECTIVE OILY SEWAGE TREATMENT TECHNOLOGY
Wang Gang, Zhang Jin, Wang Jianxi
1996, 18(2): 83-89. DOI: 10.3969/j.issn.1000-7393.1996.02.019
Abstract
DEVELOPMENT AND APPLICATION OF TEMPERATURE-CONTROL SHORT-CIRCUIT TYPE THERMAL WELL-FLUSHING WAX-REMOVAL LEAK-RESISTANCE STRING
Luo Sihai
1996, 18(2): 90-94. DOI: 10.3969/j.issn.1000-7393.1996.02.020
Abstract
PRACTICE AND COGNITION OF STABLE OIL PRODUCTION INCREMENT OF OLD-WELL FRACTURING FOR 8 YEARS RUNNING IN SALAXING OILFIELD
Li Zhi’en, Wang Xiuchen, Lan Zhongxiao
1996, 18(2): 95-99. DOI: 10.3969/j.issn.1000-7393.1996.02.021
Abstract