Category
TEMPERATURE OF BOREHOLE EFFECT ON WELL WALL STABILITY
Liu Yushi, Zhou Yuhui, Huang Kelei
1996, 18(4): 1-4. DOI: 10.3969/j.issn.1000-7393.1996.04.001
Abstract
CALCULATING SURROUNDING PRESSURE OF CASING IN CREEPING FORMATION USING GENETIC INTEGRAL METHOD
Dou Yihua, Fan Zhengxiang, Zheng Yuehui, Wang Feng
1996, 18(4): 5-7,14. DOI: 10.3969/j.issn.1000-7393.1996.04.002
Abstract
LATERAL VIBRATION OF DRILL STEM IN DEEP WELL
Gao Baokui, Gao Deli
1996, 18(4): 8-14. DOI: 10.3969/j.issn.1000-7393.1996.04.003
Abstract
CALCULATING POSITION OF CASING CENTRALIZER IN DIRECTIONAL AND HORIZONTAL WELL USING THREE MOMENT OF FLEXURE METHOD
Gong Wei’an
1996, 18(4): 15-24. DOI: 10.3969/j.issn.1000-7393.1996.04.004
Abstract
APPLICATION OF SIDETRACKING DIRECTIONAL WELL IN 140 mm CASING
Xie Ji’an
1996, 18(4): 25-27. DOI: 10.3969/j.issn.1000-7393.1996.04.005
Abstract
LINER INNER PIPE CEMENTING TECHNOLOGY
Wang Helin, Chen Xingyuan, Xue Youtang, Song Zhengzai
1996, 18(4): 28-30. DOI: 10.3969/j.issn.1000-7393.1996.04.006
Abstract
EFFECTING ON ANTI CORROSION ABILITY OF OIL WELL SLURRY USING SILICA FLOUR
Liao Gang, Yang Yuanguang, Wang Hua
1996, 18(4): 31-34,43. DOI: 10.3969/j.issn.1000-7393.1996.04.007
Abstract
A NEW METHOD FOR ABNORMAL PRESSURE PREDICTION IN UNCONTINUOUS SEDIMENTARY FORMATION
Deng Xingde
1996, 18(4): 35-38. DOI: 10.3969/j.issn.1000-7393.1996.04.008
Abstract
DEALING METHOD OF TOW FACTORS IN DRILLING MODEL
Wang Ping
1996, 18(4): 39-43. DOI: 10.3969/j.issn.1000-7393.1996.04.009
Abstract
APPLICATION OF DIAMOND DUAL CENTER BIT IN EASTERN SICHUAN
Li Wanlin, Zeng Heng, Fan Xiaoqin
1996, 18(4): 44-47. DOI: 10.3969/j.issn.1000-7393.1996.04.010
Abstract
ANALYSIS AND CALCULATION METHOD OF TEMPERATURE FIELD OF STEAM INJECTION WELL
Xu Yubing, Cui Xiaobing
1996, 18(4): 53-61. DOI: 10.3969/j.issn.1000-7393.1996.04.014
Abstract
STUDY ON THE THREE-LAYER SPHERICAL CAPSULE GEL BREAKER
Xie Jianli, Zhang Yutian
1996, 18(4): 62-67. DOI: 10.3969/j.issn.1000-7393.1996.04.015
Abstract
FEASIBILITY STUDY ON AIR INJECTION FOR ENHANCING OIL RECOVERY OF LIGHT OIL RESERVOIR AFTER WATER INJECTION
Luo Jingqi, Chen Xuezhou
1996, 18(4): 68-74. DOI: 10.3969/j.issn.1000-7393.1996.04.016
Abstract
FINITE ELEMENT METHOD FOR PREDICTING DYNAMOMETER CARD OF SLANT STRAIGHT WELL
Zhang Jifen, Song Hongcai, Wang Weidong
1996, 18(4): 75-79. DOI: 10.3969/j.issn.1000-7393.1996.04.017
Abstract
STUDY AND APPLICATION OF SELECTION AND SPACING OF CENTRALIZER FOR SLANT WELL
Wei Zhigang, Hu Xiaobing
1996, 18(4): 80-84. DOI: 10.3969/j.issn.1000-7393.1996.04.018
Abstract
PERMEABILITY DISCREPANCY OF PROPPANT FRACTURE AND ITS EFFECT ON ECONOMIC NET PRESENT VALUE AFTER FRACTURING
Zhu Wen, Zhu Huayin
1996, 18(4): 85-89. DOI: 10.3969/j.issn.1000-7393.1996.04.019
Abstract
CHEMICAL MATERIAL FOR PREVENTING PARAFFIN DEPOSITION ON SOLID-LIQUID INTERFACE
Tian Jun, Xu Jinfen, Xue Qunji
1996, 18(4): 90-94. DOI: 10.3969/j.issn.1000-7393.1996.04.020
Abstract
STUDY AND APPLICATION OF PROFILE CONTROL TECHNOLOGY USING XANTHAN GUM
Luo Hongyou, Li Yuxiang, Lei Jiangxi, Xu Boxiang
1996, 18(4): 95-99. DOI: 10.3969/j.issn.1000-7393.1996.04.021
Abstract
Z331 SERIES OF PACKERS
Xiang Yuzhang
1996, 18(4): 100-102. DOI: 10.3969/j.issn.1000-7393.1996.04.022
Abstract