Category
APPLICATION OF EXTENDED REACH DRILLING TECHNOLOGY IN BOHAI QHD32-6 OILFIELD
JIANG wei
2001, 23(4): 1-6,,83. DOI: 10.3969/j.issn.1000-7393.2001.04.001
Abstract
DRILL STEM STRENGTH ANALYZING WHILE DROPPING WITH DOUBLE-BENT SCREW DRILLS
Shi Xiaobing, Li Qian, .et al, ,
2001, 23(4): 7-10,83. DOI: 10.3969/j.issn.1000-7393.2001.04.002
Abstract
DATA EXCAVATING IN DETERMINING OF SIDETRACKING WELL LOCATION
Zhang Yongbin, Liang Ronghua.et al,
2001, 23(4): 10-12,83. DOI: 10.3969/j.issn.1000-7393.2001.04.003
Abstract
TRANSFER COEFFICIENT DUAL CASING UNDER NON-EVEN LOAD
Yang Bin, Zhang Xiaoyu
2001, 23(4): 13-15,83. DOI: 10.3969/j.issn.1000-7393.2001.04.004
Abstract
TRAJECTORY PLANING OF THREE-DIMENSIONAL HORIZONTAL WELL
He Shushan, Liu Xiushan
2001, 23(4): 16-20,83. DOI: 10.3969/j.issn.1000-7393.2001.04.005
Abstract
EFFECT OF JET GROOVE CUTTING PARAMETERS ON THE TENDENCY OF ROCK STRESS DISTRIBUTION
Zhang Zheng, Wang Zhiming
2001, 23(4): 21-23,84. DOI: 10.3969/j.issn.1000-7393.2001.04.006
Abstract
WINDOW MILLING TECHNOLOGY IN MULTILATERAL WELL-WELL HAI14-20
Guo Jianguo, Jin Shuzhong.et al, , ,
2001, 23(4): 24-26,84. DOI: 10.3969/j.issn.1000-7393.2001.04.007
Abstract
STUDY AND APPLICATION OF ENVIRONMENTAL FRIENDLY DRILLING FLUID
Liu Ya, Xu Chuntian, .et al,
2001, 23(4): 26-29,84. DOI: 10.3969/j.issn.1000-7393.2001.04.008
Abstract
ANALYSIS OF THE CASING DAMAGE CAUSES IN THE EVAPORITE BED OF JIANGHAN OILFIELD
Xie Guomin, Zhang Liangwan.et al, ,
2001, 23(4): 30-33,84. DOI: 10.3969/j.issn.1000-7393.2001.04.009
Abstract
STUDY ON THE BIT BOUNDARY CONDITION
Jiang Shu, Li Zifeng
2001, 23(4): 34-35,84. DOI: 10.3969/j.issn.1000-7393.2001.04.010
Abstract
STRESS AROUND WELLBORE AND IT’S DAMAGE TO FIELD’S PERMEABILITY
Fan Xueping, Wu Hong
2001, 23(4): 42-45,84,85. DOI: 10.3969/j.issn.1000-7393.2001.04.015
Abstract
INFLOW PERFORMANCE RELATIONSHIP FOR NON-ISOTHERMAL DISSOLVED GAS DRIVE RESERVOIR
Zhang Hongling, Wu Gang, .et al,
2001, 23(4): 46-49,85. DOI: 10.3969/j.issn.1000-7393.2001.04.016
Abstract
RECKON MODEL OF STABLE STATE OIL RATE OF VERTICAL FRACTURE WELL WITH WELL-BORE FLOW
Jiang Tingxue, Li Anqi, .et al
2001, 23(4): 50-53,85. DOI: 10.3969/j.issn.1000-7393.2001.04.017
Abstract
STUDY ON SURFACTANT ENHANCED ELECTRIC-CHEMICAL FLOODING
Wu Xinmin, Sun Hu, .et al
2001, 23(4): 54-57,85. DOI: 10.3969/j.issn.1000-7393.2001.04.018
Abstract
APPLICATION OF HORIZONTAL WELL TECHNOLOGY TO TAP REMAINING OIL IN LIANGJIALOU OILFIELD
Shi Qixin
2001, 23(4): 58-61,85. DOI: 10.3969/j.issn.1000-7393.2001.04.019
Abstract
STUDY OF ACIDIZING FLUID FOR BINGU14-CEPING1 OPEN-HOLE HORIZONTAL WELL
Wang Baofeng, Xu Zhihe, .et al, , ,
2001, 23(4): 61-65,85,86. DOI: 10.3969/j.issn.1000-7393.2001.04.020
Abstract
COMBINATION PLUG REMOVAL TECHNOLOGY ABOUT ClO2
Wei Yuejin, Hao Mingquan.et al, ,
2001, 23(4): 66-67,86. DOI: 10.3969/j.issn.1000-7393.2001.04.021
Abstract
RECONDITION INJURY CASING WITH PLUGGING AGENT IN OIL AND WATER INJECTION WELLS
Yang Zhenjie, Li Meige, .et al, , ,
2001, 23(4): 68-71,86. DOI: 10.3969/j.issn.1000-7393.2001.04.022
Abstract
CORROSION MECHANISM AND PREVENTIVE MEASURE ABOUT CARBON DIOXIDE WELL
Tan Shihai, Zhang Wenzheng.et al,
2001, 23(4): 72-74,86. DOI: 10.3969/j.issn.1000-7393.2001.04.023
Abstract
DEVELOPMENT AND APPLICATION OF HZ CORROSION INHIBITOR AND SCALE RETARDER
Wang Shengli, Du Qingzhen.et al, , , ,
2001, 23(4): 75-77,86. DOI: 10.3969/j.issn.1000-7393.2001.04.024
Abstract
INJECTION INCREASE TECHNOLOGY IN UNCONVENTIONALITY FRACTURING WATER INJECTION WELL
Gao Yinjun, Zhao Xiao, .et al, ,
2001, 23(4): 77-79,86. DOI: 10.3969/j.issn.1000-7393.2001.04.025
Abstract