Category
Drilling and completion techniques of cross-block ladder horizontal wells: a case of Well Y3p9
LIU Chenggui, XU Junfu, XU Yunlong
2013, 35(1): 1-4.
Abstract
Practice and understanding of drilling technology in ultra deep Well Xingang 1
DING Lifang, ZHOU Baoyi, WANG Xiaoyue, WANG Lihui, XIAO Chengcai
2013, 35(1): 5-9.
Abstract
Long lateral-section horizontal well drilling technology in Xinchang Gas field
XU Hao, TANG Honglin, ZHANG Xiaoming
2013, 35(1): 10-13.
Abstract
Difficulties and countermeasures for drilling long lateral-section horizontal wells
GUO Yuanheng, HE Shiming, LIU Zhongfei, JING Chengjie
2013, 35(1): 14-18.
Abstract
Horizontal well drilling technique for tight gas reservoirs in Tuha Basin
QIAN Feng, YANG Lijun
2013, 35(1): 19-22.
Abstract
Technical research on well completion design with Inflow Control Device （ICD） in horizontal wells
ZHAO Xu, YAO Zhiliang, LIU Huanle
2013, 35(1): 23-27.
Abstract
Problems and measurements of sliding sleeve staged fracturing completionin casing cementing horizontal wells
DONG Yunlong, TANG Shizhong, NIU Yanhua, LV Zhaopeng, WANG Xiaobin
2013, 35(1): 28-30.
Abstract
Cementing technology by super diameter casing in coal field
YAO Pingjun, LI Shaoli, CHEN Daoyuan, GOU Ming, AN Wenlong, LU Laibin
2013, 35(1): 31-33.
Abstract
Cementing technology for Zhongyuan Oilfield Wenliu Pucheng joint region
REN Wenliang, MA Xiaolong, WANG Xingwu, HE Chun, LIU Kai, YANG Changyong
2013, 35(1): 34-36.
Abstract
Experimental study on the influence of weighting additives on lubricity of water-based drilling fluids
WU Xinmin, LIN Longbo, ZHANG Xifeng, ZHANG Xiaofeng
2013, 35(1): 37-39.
Abstract
Synthesis and performance test of fluid loss additive H-QA
ZHANG Qunzheng, SUN Xiaowei, LI Changchun, ZHANG Yu, LIU Na
2013, 35(1): 40-44.
Abstract
Research on deep penetration of radial well hole-drilling in casing
DANG Wenhui, MA Hongwei, CHEN Jianlin, LI Yonggang, YIN Xiangrong
2013, 35(1): 45-47.
Abstract
Development and field application of DQNBMS-1 near-bit measurement while drilling
YANG Zhijian, QI Yue, WU Danghui, ZHANG Xin
2013, 35(1): 48-50.
Abstract
Calculation method and distribution of three-dimensional pore pressure in Changshaling Structural Belt
YE Zhi, FAN Honghai, ZHANG Guobin, TANG Shoubao
2013, 35(1): 51-55.
Abstract
Research and application on wire cable soft drifting technology
JIAO Shijie, WANG Zhongwen, ZHANG Hongyun, ZHONG Min, ZHU Tao
2013, 35(1): 56-58.
Abstract
Network fracturing field test
WENG Dingwei, LEI Qun, LI Dongxu, YANG Zhenzhou, LI Biansheng, LI Yuebin
2013, 35(1): 59-62.
Abstract
Practice and understanding on multiple crack volume fracturing in open hole horizontal well section of Zone Su53
TANG Yong, WANG Guoyong, LI Zhilong, CHEN Shouyu, DU Linlin, LI Wei
2013, 35(1): 63-67.
Abstract
Application of “well plant” fracturing mode in Daniudi gas field
LI Kezhi, HE Qing, QIN Yuying, LI Guofeng, ZHANG Yongchun, LI Yueli
2013, 35(1): 68-71.
Abstract
Method analysis on natural decline rate control in mature oilfield
LIU Hancheng
2013, 35(1): 72-74.
Abstract
Integral design and application with oil production as priority
GUO Jimin, WANG Fengqing, ZHANG Zhanmin, XIE Jiang, WU Zanmei, MA Fengqin
2013, 35(1): 75-78.
Abstract
Prediction model of rod wear life based on partial-wear analysis
WU Yanqiang, WU Xiaodong, HAN Guoqing, ZHAO Ruidong, ZHENG Lianying, ZHANG Yanxia
2013, 35(1): 79-82.
Abstract
Design and numerical simulation for a novel low flow rate nozzle
SHEN Xiaoli, YU Jiuzheng, WANG Zijian
2013, 35(1): 83-87.
Abstract
Moderate sand control technology in Laohekou field
XIE Guixue
2013, 35(1): 87-89.
Abstract
Oil（gas）-testing matching technology for high containing sour gas well
ZHANG Shilin, PAN Yanping, CAI Maojia, LI Shixian, GU Xingjun
2013, 35(1): 90-93.
Abstract
Finite element analysis of effect of secondary perforation on screen pipe strength
WANG Hanxiang, LIU Yanxin, CHEN Yi, LAN Wenjian, MENG Fanyu
2013, 35(1): 94-96.
Abstract
Influencing factor and cross-linking performance evaluation of asynchronous cross-linking profile control and flooding system
ZHANG Zuguo, WANG Zengbao, WU Chuan, ZHAO Xiutai, GAO Yuan, ZHANG Yang
2013, 35(1): 97-100.
Abstract
Research on an autogenetic heat and high temperature resistant fracturing fluid systemwith high-density
LIU Pingli, LAN Xitang, XING Xijin, LIU Shujie, ZHANG Wenpeng
2013, 35(1): 101-104.
Abstract
Application of low concentration CMHPG fracturing fluidin Huaqing reservoir of Changqing Oilfield
WANG Chunpeng, YANG Yanli, CUI Weixiang, WANG Shangwei, XU Minjie, HUANG Gaochuan
2013, 35(1): 105-107.
Abstract
CFD-based parameter optimization for self-propelled nozzle
WANG Changbin, WANG Min, XU Yang, WEI Wei
2013, 35(1): 108-111.
Abstract
Modeling and analysis of formation boundaries based on LWD natural gamma
XIANG Changsheng, WANG Zhifeng, KANG Wuchen
2013, 35(1): 112-114.
Abstract
Distribution characteristics evaluation of regional leakage based on fuzzy matter-element
HOU Bing, CHEN Mian, ZHU Jing
2013, 35(1): 115-118.
Abstract
Causes analysis of wellhead equipment eccentric wear in Well KXS203
LU Shuanlu, TENG Xueqing, LI Xiaochun, LI Ning, XU Ximing, TANG Tao
2013, 35(1): 118-121.
Abstract
Reservoir stimulation difficulty and countermeasures for SF Gas Field
DIAO Su, LI Tiefeng, REN Shan, CI Jianfa
2013, 35(1): 122-124.
Abstract