Category
Mechanisms of sidewall stability loss in horizontal wells drilled for shale gas development in Jiaoshiba Block
CUI Yunhai, LIU Houbin, YANG Haiping, MA Tianshou
2016, 38(5): 545-552. DOI: 10.13639/j.odpt.2016.05.001
Abstract
Research on limit depth of the surface conductor by jetting method in deepwater drilling
XU Yunjin, YANG Jin, ZHOU Bo, MENG Wei
2016, 38(5): 553-557. DOI: 10.13639/j.odpt.2016.05.002
Abstract
Application of trajectory error analysis in trajectory design of communicated wells
XIA Huanyu, CHEN Hongliang, TONG Wujun, GONG Ning, WU Shinan, CHEN Pengfei
2016, 38(5): 558-563. DOI: 10.13639/j.odpt.2016.05.003
Abstract
Anti-collision design and control of borehole trajectory of building-up section of Well Su 53-78-71H
YANG Xiaofeng
2016, 38(5): 564-567. DOI: 10.13639/j.odpt.2016.05.004
Abstract
Safe drilling of horizontal wells and reservoir protection in Shahejie Formation, Bozhong Block
XU Jie, HE Ruibing, LIU Xiaogang, ZHU Guowei
2016, 38(5): 568-572. DOI: 10.13639/j.odpt.2016.05.005
Abstract
Window side-tracking in slim hole well of Nanpu buried-hill hydrocarbon reservoirs
SHEN Yuanyuan, ZHU Kuanliang, WANG Zaiming, YU Wenyan
2016, 38(5): 573-576. DOI: 10.13639/j.odpt.2016.05.006
Abstract
Big hole of second section of Well Mashen-1 optimized drilling technology
FENG Lin, MU Yajun, YANG Daiming, ZHOU Xiyong, TANG Fenzhou
2016, 38(5): 577-582. DOI: 10.13639/j.odpt.2016.05.007
Abstract
The preparing and running casing technology of super deep and slim hole in Well Mashen-1
KANG Haitao, BAI Juncheng, CAI Yunping, ZHANG Hanchi
2016, 38(5): 583-587. DOI: 10.13639/j.odpt.2016.05.008
Abstract
Drilling fluid for the super-deep Well Mashen-1
LUO Renwen, LONG Daqing, WANG Kun, FAN Jianguo, LYU Jia, BAI Jing
2016, 38(5): 588-593. DOI: 10.13639/j.odpt.2016.05.009
Abstract
Adaptability among loads and mechanical parameters of cement sheath
ZHANG Jingfu, LYU Yingbo, LIU Shuoqiong, XU Ming, ZHANG Qiang, LI Yong
2016, 38(5): 594-600. DOI: 10.13639/j.odpt.2016.05.010
Abstract
Assessment method for flushing efficiency of flushing liquid in cementing
TANG Shizhong, RAO Fupei, WU Hua, ZHENG Lina, ZHANG Xueqiang
2016, 38(5): 601-605. DOI: 10.13639/j.odpt.2016.05.011
Abstract
Development and application of curable spacer fluids for adjusting wells in Block Z35
LI Zaoyuan, WU Longfei, ZHANG Xingguo, SUN Jinfei, DU Jianbo, GUO Xiaoyang
2016, 38(5): 606-611. DOI: 10.13639/j.odpt.2016.05.012
Abstract
Application of plugging-while-drilling technology in long open-hole interval of the Well Yueman-3-3
CHEN Zhi, QIU Shengnan, CAO Jingyu, LI Haibiao, XU Xingjun, GONG Xiaopan
2016, 38(5): 612-616. DOI: 10.13639/j.odpt.2016.05.013
Abstract
Productivity enhancement through fishbone structures in micro-holes
WANG Minsheng, GUANG Xinjun, DAI Wenchao, QU Hai
2016, 38(5): 617-621. DOI: 10.13639/j.odpt.2016.05.014
Abstract
Pattern and control of gravity displacement between asphaltic heavy oil and drilling fluid
ZHAO Xiangyang, MENG Yingfeng, HOU Xutian, YANG Shunhui, BAO Hongzhi, LI Gao
2016, 38(5): 622-627. DOI: 10.13639/j.odpt.2016.05.015
Abstract
An innovative technique for predicting wellhead uplift height
LIN Yuanhua, XIONG Hao, DENG Kuanhai, ZENG Dezhi, ZHU Dajiang, LU Yafeng
2016, 38(5): 628-632. DOI: 10.13639/j.odpt.2016.05.016
Abstract
Semi-analytical seepage model for horizontal wells with volume fracturing in tight oil reservoirs
REN Zongxiao, WU Xiaodong, JIN Gang, LI Huachang, WANG Ruihe, MA Gaoqiang
2016, 38(5): 633-639. DOI: 10.13639/j.odpt.2016.05.017
Abstract
Fast and accurate prediction method about productivities of horizontal wells in merged overseas oilfields
MIAO Yanan, LI Xiangfang, ZHOU Yunjian, CHEN Yu, ZHU Guojin, YANG Li
2016, 38(5): 640-644. DOI: 10.13639/j.odpt.2016.05.018
Abstract
Calculation of sweep efficiency for water flooding development of conventional heavy oil using the stream-tube method
SHEN Fei, CHENG Linsong, HUANG Shijun, ZHAO Wenqi, LIU Xueying
2016, 38(5): 645-649. DOI: 10.13639/j.odpt.2016.05.019
Abstract
Calculation methods for pressure drop along downhole bending section of coiled tubing
YAO Liming, HE Juncai, LIU Jubao, LAN Chengyu, LIU Yuxi, ZHANG Yu
2016, 38(5): 650-656. DOI: 10.13639/j.odpt.2016.05.020
Abstract
Differential pressure model for testing low-porosity and low-permeability gas reservoir based on discharged invading solids
ZHANG Haishan, QIU Kang, LI Sanxi, WANG Hongmin, DUAN Feifei, QIN Binglin
2016, 38(5): 657-660. DOI: 10.13639/j.odpt.2016.05.021
Abstract
Intervention with the temperature field of shallow and low-temperature gas wells in super-deep South China Sea
DONG Zhao, YU Yi, REN Guanlong, ZHANG Chong, MENG Wenbo
2016, 38(5): 661-666. DOI: 10.13639/j.odpt.2016.05.022
Abstract
Research on integral pipe string and optimization of parameters for production of horizontal wells in Puguang Gasifeld
CAO Yanguang, ZHANG Qingsheng, CHEN Chuandong, ZHANG Wenchang, LI Meng, ZHANG Manlai
2016, 38(5): 667-672. DOI: 10.13639/j.odpt.2016.05.023
Abstract
Design of control system for water drainage and gas production with plunger lift under multi-mode optimization
LI Rui, CAI Changxin, LI Yong, LIAO Ruiquan
2016, 38(5): 673-677. DOI: 10.13639/j.odpt.2016.05.024
Abstract
Volumetric reconstruction experiments and multi-scale simulation of tight oil reservoir with considerations of imbibition and displacement
LI Shuai, DING Yunhong, MENG Di, LU Yongjun, XU Jiangwen
2016, 38(5): 678-683. DOI: 10.13639/j.odpt.2016.05.025
Abstract
Experimental study on the flow conductivity of quartz sand-ceramsite proppant
CAO Kexue, JIANG Jianfang, GUO Liang, WANG Le, MA Feng, AN Dongmei
2016, 38(5): 684-688. DOI: 10.13639/j.odpt.2016.05.026
Abstract
Purification of discharged residual guar fracturing fluid
LIN Xiao, YAO Yuanyuan, CHEN Guo
2016, 38(5): 689-692. DOI: 10.13639/j.odpt.2016.05.027
Abstract
Design optimization based on genetic algorithm for full-sized counter-type fracturing sleeve
ZHAO Chuanwei, TANG Ming, LI Wei, XIAO Jingwei, MA Decai, SUN Haoyu
2016, 38(5): 693-699. DOI: 10.13639/j.odpt.2016.05.028
Abstract
Tools for finely stratified fracturing in wells with casing deformation
HUANG Hua, YU Xi, YU Donghe, MA Changqing, LEI Pengfei, TAN Fujun, WANG Qian
2016, 38(5): 700-704. DOI: 10.13639/j.odpt.2016.05.029
Abstract
Full-sized diverting packer for large-scale multi-stage fracturing stimulation
LI Borui, WANG Jing
2016, 38(5): 705-708. DOI: 10.13639/j.odpt.2016.05.030
Abstract
Tripping of pipe string using singular elevator with remote control
GENG Yuguang, PEI Yashi, GU Quanfu, HUANG Shu, SUN Lianhui, WANG Jianwei
2016, 38(5): 709-712. DOI: 10.13639/j.odpt.2016.05.031
Abstract